DC-DC Adjustable NC Automatic Buck Boost Power Supply LCD Constant Voltage Current Optional Modbus

DC-DC Adjustable NC Automatic Buck Boost Power Supply LCD Constant Voltage Current Optional Modbus
  • Sellershoppingblog.us
  • List PriceUS$25.43piece
  • Sale PriceUS$25.43piece
  • ShippingFree Shipping
  • Ratings4,8 (351)

Product Description

Feature:

Function: With Modbus / No Modbus (Optional)
Input voltage: 6V-32V
Output voltage: 0-30V continuously adjustable (automatic step-up and down)
Output current: adjustable, the maximum 5A (temperature over 60 degrees, please strengthen the cooling, there are reserved fan installation location and terminals)
Output power: up to 160W (recommended in the use of 120W, when large pressure difference please reduce the power)
Operating temperature: -10 to +75 degrees (Note the use of power tube temperature, if exceed please strengthen the cooling, there are reserved fan installation location and terminal)
Resolution accuracy: voltage 0.01V, current 0.01A
Conversion efficiency: up to 95%
Short circuit protection: Yes, constant current Current set constant current value
Input anti-reversed: Yes
Output reverse flow: None, for charging please add a diode!(not includes)
Wiring method: terminal VI + for the input positive, VO + for the output positive
Module size (display part): 79mm x 43mm x 46mm (Length x Width x Height), Power board part: 93mm x 70mm x 31mm (Length x Width x Height)
Hole size: (display part) 76mm x 39mm (Length x Width)
Weight: 128g

Package includes:

1 x Boost Power Supply Module
1 x Fan

Setting description:

Output voltage setting: short press "CV" key, enter the voltage setting mode, turn the potentiometer to adjust the current voltage, press the potentiometer can switch to the decimal point forward/after the voltage value to adjust, then press "CV" key to save and exit.

DC-DC Adjustable NC Automatic Buck Boost Power Supply LCD Constant Voltage Current Optional Modbus

Output current setting: short press "CC" key, enter the current setting mode, turn the potentiometer to adjust the current value, press the potentiometer can switch to the decimal point forward/after the current value to adjust, then press "CC" key to save and exit. (Note that the constant current indicator light will be turned red, constant current adjustable current, must be the actual load output current is greater than the set current when the constant current mode, otherwise is the constant voltage state, not current transferred to 2A, is any equipment has changed 2A, please know.)

DC-DC Adjustable NC Automatic Buck Boost Power Supply LCD Constant Voltage Current Optional Modbus
Display mode setting: short press "MODE" to switch the display mode, IN for the display input voltage, OUT for the display output voltage.


DC-DC Adjustable NC Automatic Buck Boost Power Supply LCD Constant Voltage Current Optional Modbus
Switch output setting: directly short press the potentiometer key, can open or close the output voltage, turn off the current position display OFF words.

DC-DC Adjustable NC Automatic Buck Boost Power Supply LCD Constant Voltage Current Optional Modbus
Modbus address settings: short press "SET" key, enter the address setting mode -Id, the default is 1, move the potentiometer to adjust the current address, range 1-255 adjustment, after adjust and then press the "SET" key to save, through the host computer software can also set the address.

DC-DC Adjustable NC Automatic Buck Boost Power Supply LCD Constant Voltage Current Optional Modbus


DC-DC Adjustable NC Automatic Buck Boost Power Supply LCD Constant Voltage Current Optional Modbus

DC-DC Adjustable NC Automatic Buck Boost Power Supply LCD Constant Voltage Current Optional Modbus

DC-DC Adjustable NC Automatic Buck Boost Power Supply LCD Constant Voltage Current Optional Modbus

DC-DC Adjustable NC Automatic Buck Boost Power Supply LCD Constant Voltage Current Optional Modbus


DC-DC Adjustable NC Automatic Buck Boost Power Supply LCD Constant Voltage Current Optional Modbus

Similar Products